top of page
UV DTF Transfers
Print. Peel. Stick.
Bring your designs to life with UV DTF Stickers!
Make any surface your canvas with UV DTF stickers — durable, vibrant, and easy to apply. Each design delivers crisp detail and long-lasting color, resistant to fading, scratching, and daily wear. Perfect for tumblers, phone cases, mugs, and any hard, smooth surface.
⚠️ Note: Not for clothing or textiles — for apparel, please use TruPrints DTF Transfers.
Item Type | Recommended Print Size (inches) | Notes / Fit Tips |
|---|---|---|
Shot Glass | 1.5–2" W × 1.5" H | Keep design small and centered; wrap-around not needed |
11 oz Mug | 3.5–4" W × 3" H | Fits one side; for full wrap use ~8.5–9" W |
15 oz Mug | 3.75–4.25" W × 3.5" H | For full wrap use ~9.25–9.5" W |
16 oz Glass Can (Beer Can Glass) | 3.5–4" W × 3.5" H | Standard wrap 9.3" W × 4.3" H |
20 oz Skinny Tumbler | 9.3" W × 8.2" H | Full wrap coverage; reduce width slightly for seamless look |
30 oz Skinny Tumbler | 10.2" W × 9.5" H | Adjust slightly based on brand (some taper more) |
Glass Cup (Curved / Libbey) | 9–9.25" W × 4.3" H | Trim excess around curve for smooth wrap |
Acrylic Cup (Starbucks) | 3.5–4" W × 3.5" H | Center design to avoid curved edges |
Water Bottle (20–32 oz) | 3–4" W × 3–4" H | Ideal for one-sided logos or vertical text |
Can Cooler / Koozie | 3–3.5" W × 2.5" H | Avoid wrap design; works best as single placement |
Mason Jar / Short Glass Cup | 3–3.5" W × 2.75" H | Adjust width slightly for curved glass |
Tips
Always measure the printable area of your blank before printing — sizes can vary slightly by brand.
If wrapping, leave 0.1–0.2 inch overlap for seamless alignment.
For curved surfaces (like mugs or Libbey cups), trim excess film for cleaner application.
Press or squeegee evenly to avoid bubbles on UV DTF transfers.
We don’t have any products to show here right now.
bottom of page